Product description
RB10-F2404M3-AC Layer 3 switch design is 1RU/19” wide box with 24x 10G/1G Base SFP+ slots and 4x 100G/40G QSFP28/QSFP+ ports, powered by a high-performance ASIC switch chip, supporting 32K MAC addresses and 28K routing items and offering redundant power input (two AC power supplies are supplied by default for power redundancy being optional). Switch Supports Virtual Cluster Switching Technique: the logic control plane, service control plane and service data plane are separated and therefore device can support continuous Layer3 routing forwarding, avoiding service interruption as a result of a single point of failure.
Switch supports multiple services like IPv6, MPLS, VPN and network security based on L2/L3/L4 wire-speed switching service. It supports hot firmware upgrade, continuous forwarding, soft restarting and redundancy protection.
Features
VLAN: 4K Active VLAN, QinQ & Selective QinQ, GVRP, Private VLAN, Voice VLAN
Spanning Tree: 802.1D (STP) 802.1W (RSTP) and 802.1S (MSTP) BPDU guard, root guard and loopback guard
Multicast: IGMP v1/v2/v3, IGMP Snooping, IGMP Fast Leave, MVR, IGMP filter, PIM-SM and PIM-DM
MAC Switching: Static Configuration and Dynamically Learning of MAC Address, Check and Delete MAC Address, MAC Address Aging Time, Limit on MAC Address Learning Number, MAC Address Filtering Function, Black-Hole MAC Items
IPv4: Static Routing, RIP V1/V2, OSPF and BGP, Policy Routing, Load Balance through Equal-Cost Routing, BFD for OSPF and BGP
IPv6: ICMPv6, DHCPv6, ACLv6 and IPv6 Telnet , IPv6 neighbor discovery, Path MTU discovery ,MLD v1/2, MLD snooping , IPv6 static routing, RIPng, OSPFv3 and BGP4+, Manual Tunnel, ISATAP Tunnel and 6-To-4 Tunnel
Accessories: Power cord, rackmount kits, console cable
QoS: CAR, HQoS, MAC/IP/TCP/UDP/ VLAN/ COS/ DSCP/ TOS based QoS, 802.1P/ DSCP priority re- labeling, SP, WRR and “SP+WRR”, Tail-Drop, WRED, flow monitoring and traffic shaping
Security: Port isolation, Port security, and “IP+MAC+port” binding, MAC sticky DHCP Snooping and option 82, DAI & IP source guard, PPPoE+, IEEE 802.1x, Radius and BDTacacs+ L2/L3/L4 ACL flow identification and
filtration, Anti-attack from DDoS, TCP’s SYN Flood, UDP Flood, etc. Broadcast/multicast/unknown unicast storm-control MD5, SHA-256, RSA-1024, AES256, etc.
Reliability: Static/LACP link aggregation, ISSU uninterrupted system upgrade; Protection Including EAPS and ERPS, VRRP/HSRP, Ethernet OAM 802.3ah/802.1ag/ITU-Y.1731, GR for OSPE and BGP, BFD for OSPF and BGP
Management: Console, Telnet, SSH v1/2, HTTP, HTTPS SNMP v1/v2/v3, RMON TFTP, FTP, SFTP NTP ZTP (Zero Touch Provisioning), SPAN, RSPAN
Environment: Operating temperature/humidity: 0°C -50°C ,10%-90% non-condensing
Storage temperature/humidity: -20°C -70°C , 5%-95% non-condensing
Certification: CE, FCC, ROHS
Specifications
PART No. RB10-F2404M3-AC Interface 24× 1000/10GBase SFP+ ports, 4×100G/40G QSFP28/QSFP+ ports Console 1× RJ-45, 1 x USB and 1x RS-232 (CLI) (serial RS-232 DB9 cable included) Backplane 800 Gbps Forwarding Rate 600 Mpps Total output BTU (1000BTU/H=293W) 238.91 Fan Number 4 Noise@25°C(dBA) 57 MTBF (h) > 50,000 Forwarding Mode Store-and-Forward Flash (MB) 32 DRAM (MB) 1024 MAC Address Table Size 16K for IPv4; 12K for IPv6 Jumbo Frame Size 9K Total SVI 1K Power Supply AC:100V-240V,50/60Hz ±10% 100W, removable and redundant (two PS inserted by default) Power Consumption Full load < 75W Chassis Dimensions (WxDxH) (mm) 442 x 350 x 44 Weight (Kg) (unpopulated) 7.1
Additional information on RB10-F2404M3-AC switch: PDF Datasheet