Texas Steel Conversion is an API licensed 5DP and 7-1 manufacturer. The extra steps we put into our pipe translate to extra service life for you. Our conservative multiple-heat/multiple-blow forging process is carefully controlled, keeping stress risers in the upset almost non-existent and assuring incomparable geometric consistency in every pipe.
Our tool joints are manufactured and heat treated to exceed API requirements. [1] Threading is done in accordance with API Specification 5DP. Hardbanding can be applied to your specifications.
[2] Tool joints are inertia welded to the tubes with computer-monitored precision. Concentricity is carefully monitored and controlled, and the parameters of each weld are electronically recorded, and traceable to each joint.
After removal of weld flash, the weld area is austenitized, quenched, and tempered to achieve the required mechanical properties. [3] Heat treat cycles for each weld are compared to specific parameters and recorded for traceability.
After all steps and machine marks are polished from the OD and ID area, hardness testing, ultrasonic testing, and wet magnetic particle inspections [4] are used to verify the integrity of each weld zone. By the time TSC Drill Pipe reaches you, it has gone through multiple Quality Control processes. Texas Steel Conversion's Quality System is certified under ISO9001. The American Petroleum Institute audits TSC to the Quality Management System requirements of API specification Q-1.
If you have any questions on Where is drill pipe manufactured?. We will give the professional answers to your questions.