3/16" Tree-Grip Dead-end for EHS Cable - 3990 lbs Breaking Strength

09 Jun.,2022

Most common type of preformed grip used by arborists for tree cabling (see our EHS 1x7 Guy Strand Cable) Designed to eliminate the costly labor and time-consuming hassle of cable splicing Installs quickly and easily (about 60 seconds per grip) Designed to accept and retain a steel thimble, popular with arborists Achieves 100% of the published rated breaking strength of EHS strand

 

Dead End Guy Grip

Product Description

3/16" Tree-Grip Dead-end for EHS Cable - 3990 lbs Breaking Strength

Safety Notice

WARNING:

Cancer and Reproductive Harm -

Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.