A thermoset polymer, this coating is categorised under protective coatings because once it has been set, it remains permanent. The crosslinking of the polymers forms the resin used to coat the Epoxy Coated Fittings. FBE is referred to as a fusion bonding process, which is irreversible on the application of heat.
FBE Coated Fittings
Epoxy Coated Fittings
FBE Coated Carbon Steel Elbow
Get a free quote now, send us your requirements on stindia@stindia.com.
FBE Lined ASTM A234 WPB Tee
3PE coated WPHY65 pipe elbow
Epoxy Coated ASTM A234 Grade WPB Elbow
API 5L L415M 20 inch 22 inch 3PE anti-corrosion welded elbow manufacturer
FBE Coated ASTM A234 Gr. WPB Reducer
EN545/598 FBE coated DCI all flange tee pipe fitting
Epoxy Coated ASTM A234 WPB Cap
Coated seamless butt-welded carbon steel pipe fittings
Epoxy Coated Flanged Fittings
ISO2531 fbe coated ductile iron flanged duckfoot elbow pipe fitting
Fusion Bonded Epoxy Coated Fittings
Epoxy Green FBE coating Ductile iron pipe fitting
Epoxy Coated Steel Fittings
FBE DN200 ductile cast iron flange spigot pipe fittings
Epoxy Coated Ductile Iron Fittings
EN545/598 FBE coated DCI all flange tee pipe fitting
Epoxy Coated Cast Iron Fittings
Anti corrosion coating pipe fittings
Epoxy Coated Cast Iron Pipe Fittings
EN 545 ductile iron di pipe fitting double flanged bend 90 degree
Ceramic lined steel tees
20 INCH x 8 INCH SCH 80 REDUCING TEE BE SMLS ASTM A234 Gr. WPB
2PE 3PE FBE/IPN8710/EPOXY coating anti-corrosion steel pipe fittings
Alumina ceramic lined tee
There are several reasons why FBE Coated Fittings are preferred across several industries. Firstly, being a permanent and irreversible coating, it is able to offer protection from mechanical damage. Moreover, the Epoxy Coated Steel Fittings perform well even at elevated temperatures, while exhibiting resistance to issues such as wear, abrasion, compression, as well as cavitation.
While FBE coating requires the use of both a primer and an adhesive, liquid epoxy does not require them. Another distinguishing characteristic noted by many FBE Coated Fittings Suppliers is that the curing time required for a liquid epoxy is much higher than that of an FBE Coated one.
Though the Epoxy Reducer Price is more expensive in comparison to other coatings. While the price of the coating is much higher, its durability, as well as corrosion resistance properties, makes purchasing the Epoxy Coated Flanged Fittings worth it.
Spigots are produced as per AS/NZS 2280 specification.