Fusion bonded epoxy(FBE) coating generally refers to a single layer of fused epoxy coating, using fused epoxy powder coating as a film-forming material. This kind of epoxy powder coating is a kind of thermosetting coating, which is made of solid epoxy resin, curing agent and various additives through mixing and grinding.Fusion bonded epoxy (FBE) coating is a powder coating broadly used to provide protection to pipelines, steel pipes and a wide range of piping bonds.FBE Coating has been used as a standard in industries for protection against corrosion.
FBE coatings have good handling characteristics; they are flexible and resistant to soil pressure.These are used in pipeline projects that have normal requirements and do not have harsh conditions.
Features of Fusion Bonded Epoxy (FBE) coated pipes:
FBE coating is corrosion resistant and chemical resistant
It has high resistance to cathodic disbondment
FBE coating increases the life span of steel pipes providing a constant performance throughout its life span.
The FBE coating has high bond strength and bond firmly to mild steel pipe surface.
Standards of Api 5l Epoxy Primer Coated Pipes
API 5L – Gr.B/X42/X46/X52/X60/X70 etc.
ISO3183 – L245/L290/L320/L360/L415/L485 etc.
Minimum Order Quantity
Outside Diameter Ranges
0.405-80(in) or 10.3mm-2032mm
4 1/2 -80(in) or 114.3mm-2032mm
Wall Thickness Ranges
SCH10~SCH160 Or STD,XS,XXS Or 1.73mm~59.54mm
For 20Ft Container
For 40Ft Container
Most common choice
Cold Drawn,Hot Finished,Hot Expanded
Pipe size should under DN600
Pipe size above DN50, and the thickness should greater than 3.2mm
·Diverse products(Steel pipes, pipe fittings, other fittings)
·Any third party inspection is accepted by we company.
·Quick response in quotation,delivery,after-service.
·Focus on pipe & tube solution for project application.
Epoxy Primer Coated Pipes Coating Specification
DIN30670-1991,CAN/CSA Z245,21-2010,ISO21809-1-2009 SY/T 0413-2002,GB/T23257-2009
SY/T 0315-2005,AWWA C213-2001,CAN/CSAZ245.20-2010,ISO218909-2-2007,API RP5L9-2001
Enamel &Tape hot-applied
Liquid epoxy coating
Polyurethane insulated coating
Liquid Epoxy Coating
Cement Mortar Lining
Epoxy Primer Coated Pipes Technique Data
Larger than 250um<0.2% Larger than 150um<3.0%
1.2~1.8g/cm3(Owing to the different formula and different colors)
Recommened Film Thinkness :
a. In FBE systems: 300-400 microns (12-16 mils) b. As a primer in 3-layer PE or PP systems: 150-300 microns (6-12 mils)
0.6993 m2/kg per mm (134.6 ft2/lb per mil)
Operating Temperature Range:
"-73ºC (-100ºF) to 110ºC (230ºF)
12 Months if stored below 27ºC (80ºF) and 65% relative humidity.
150μm powder on sieve ≤3%,250μm powder on sieve ≤0.2%
under 200℃≥12s, and in accordance with manufacturer’s value ±20%
There are probably hundreds of different methods for packing a pipe, and most of them have merit, but there are two principles that are vital for any method to work prevent rusting and Sea transportation security.Our packing can meet any needs of the customers.
Plastic caps plugged at the two sides of pipe ends
Should be avoided by the steel strapping and transport damage
Bundled signs should be uniform and consistent
The same bundle(batch) of steel pipe should be came from the same furnace.
The steel pipe has the same furnace number, the same steel grade, the same specifications.
Keyboard PCB 5 Jaw Chuck Smartboards In Classrooms CN88/12 Fire Proof FR Fabric 144 cell solar panel rapid drug test Bedroom Furniture Wholesale Wholesale Living Room Furniture Multi-functional Office Chair bar furniture wholesale wholesale rocking chairs Gynecology Chair Permanent Magnet Synchronous Motor unarmored cable wholesale fruit powder fbe pipe