Want to reduce plastic waste in your kitchen? Come learn how to make resuable homemade beeswax wraps to store food instead!
Have you used beeswax wraps before? They’re nifty little things. We use them all the time! Beeswax wraps are a sustainable alternative to plastic cling wrap, and a great way to reduce plastic waste in the kitchen. Even better, it’s incredibly easy to make your own homemade beeswax wraps! You can even repurpose old fabric for this DIY project. Follow along to learn how.
This tutorial shows the most simple and straightforward method to make reusable homemade beeswax wraps possible, using only fabric and beeswax! However, I’ll also share an alternative option if you’d like to give that a try too. We’ll also go over best practices on how to use, wash, store, and refresh your homemade beeswax wraps at the end of this article.
Beeswax wraps are pieces of fabric that have been coated in pure beeswax – sometimes along with a few other ingredients like oil and tree resin. They are moldable, slightly sticky, and used to protect, seal, or package food. Furthermore, beeswax wraps are reusable, non-toxic, and biodegradable. You can purchase pre-made ones, or make your own! Rather than single-use plastic wrap, we use our homemade beeswax wraps to cover bowls and food containers, or to wrap food directly. You can also sow or clip the wraps into snack or sandwich baggies!
Beeswax has natural antibacterial and anti-fungal properties, so they’re quite sanitary! This study confirmed that food wrap products containing beeswax are effective at preventing food spoilage and inhibit the spread of harmful food-borne bacteria. However, be sure to follow the best practices to keep them clean (described at the end of this article). The combination of beeswax and cloth creates a breathable food wrap that locks in moisture, keeps food fresh longer, but also allows it to naturally breathe. Because they are made with natural beeswax, the wraps do smell a bit like… well, beeswax. I don’t personally find this to be an issue.
It is best to use 100% cotton, hemp or linen fabric to make homemade beeswax wraps. Organic or re-used fabric is all the better! Natural fabrics like cotton will readily soak up the beeswax right into its fibers. In contrast, synthetic fabrics that contain polyester or nylon will not absorb it as easily. The beeswax will remain more on the surface and eventually flake off.
It is best to make homemade beeswax wraps with a thin to medium-weight fabric: something similar to the thickness of a t-shirt, pillowcase, cloth napkin, flour sack or tea towel – not thick and fuzzy like flannel or a dish towel. On the flip side, I wouldn’t use something as thin as cheesecloth. For this particular set of homemade beeswax wraps, I used an old shirt that no longer fit well. Up-cycling for the win!
Some homemade beeswax recipes call for other optional ingredients like jojoba oil and pine resin. You’ll commonly see these additions in commercially-made beeswax wraps. They make the wraps more pliable (less stiff) at room temperature, and also help them stick to surfaces and themselves more readily. If you’re creating a large amount of beeswax wraps (making it worthwhile to buy the resin), giving them as gifts, or want to make them extra-professional, feel free to try this option. However, the simple fabric and wax version work just fine in my experience!
For this variation, combine 1/4 cup beeswax pastilles, 2 tablespoons of pine resin, and 1 tablespoon of organic jojoba oil in a double-boiler on the stovetop. Heat until melted and fully combined. Use a brush to apply an even coat of the mixture across the surface of the fabric. It should be enough to absorb and saturate the fabric (covering at least two small-to-medium wraps), but not pool and be drippy. You’ll have to work quickly to prevent the wax from hardening as you go. Hang immediately while still wet.
Otherwise, keep reading to learn the way we usually do it instead!
I’ve seen folks do all sorts of cute and creative things with their homemade beeswax wraps! For example, you could fold, clip, or sew a large wrap into a snack or sandwich baggie size. Adorn it with a button and loop, or little patch of velcro to keep it closed. Or, simply pinch together the top of the “bag” and roll it down to seal.
Use your homemade beeswax wraps to store cut fruit and veggies, around cheese, bread, and more. They’re perfect to use on top of bowls, food storage containers, or glass jars instead of plastic wrap or a lid – like over a salad or leftover bowl of soup in the fridge. We use ours to cover our proofing basket and bowl of dough when we’re making homemade sourdough.
Because you shouldn’t wash beeswax wraps with hot water (discussed in the wash and care section to follow) and they therefore can’t be thoroughly sanitized, it is best to NOT use your wraps in contact with raw meat. Consumer New Zealand also suggests to avoid using beeswax wraps to cover food meant for infants or the immunocompromised, just in case.
Homemade beeswax wraps usually stick to themselves better than a bowl or other object, so simply pinch the sides together to create a good hold. If they’re feeling a tad stiff and not super sticky, make them more pliable by rubbing and warming between your hands briefly before use.
As you use, bend, and shape your beeswax wraps, it is totally normal for creases and faint white lines to develop. However, if you were a little too heavy-handed with the beeswax, it may get flaky and shed. In that case, put your homemade beeswax wrap back in the warm oven, allow the wax to re-melt, sop up some of the excess wax with a napkin or paper towel, and then put it back in the oven once more to even out and finish. In contrast, if your wrap feels limp and not waxy enough (or has visible areas missing wax) toss it back in the oven with an additional sprinkle of beeswax to provide a thicker coating.
Wash your homemade beeswax wraps with cold to lukewarm water and mild soap, such as Dr. Bronner’s natural castile soap. Avoid using hot water since it can melt the wax. You can also wipe them down with a damp cloth. Allow the wraps to air dry and then store them in a cool, dry place. Once ours are fully dry, we simply fold them up and tuck them in a kitchen drawer.
Homemade beeswax wraps should withstand several years of use. Once they become old, thin, and/or less sticky, it is easy to refresh them! Simply tuck the old wraps back in the warm oven with a small sprinkle of beeswax to provide a fresh new coating and lease on life. If they’re really old and beat up, you could simply compost them. Since they’re made from 100% natural materials, beeswax wraps are biodegradable.
That was super simple, right? I hope you enjoyed this tutorial, and feel inspired to part ways with plastic wrap. Our planet thanks you for your efforts. Please let me know if you have any questions, and feel free to spread the love by sharing this post!
If you’re into DIY or reducing waste, you’ll probably love these articles too:
Want to reduce plastic waste in your kitchen? Come learn how to make homemade beeswax wraps to store food instead! They're reusable, non-toxic, biodegradable, and really easy to make.
Prep Time
30
mins
Cook Time
5
mins
Fabric (100% cotton, linen or hemp)
Scissors or pinking shears
Beeswax pastilles (pellets) or shaved block beeswax
Something to hang the wraps up to dry – such as a clothes hanger or twine and clothespins
Parchment paper or tin foil
Paint brush. (Optional, but is helpful to spread the wax evenly across the fabric after it melts. Note the brush will get covered in wax and may not be suitable for certain future projects.)
Baking sheet(s) and oven
Cut the fabric into desired shapes and sizes of your choice. (See common size suggestions in the notes below).
Preheat oven to lowest setting (150-220F).
Line baking sheet(s) with parchment paper or tin foil, and lay fabric on top.
Sprinkle a modest amount of beeswax pastilles over the surface of the fabric. See photos above for example.
Place in oven until wax fully melts and soaks into fabric, approximately 5 minutes.
Remove from oven and use a brush to spread the melted wax evenly across the fabric (working from center outwards). Work quickly before wax begins to harden.
Immediately hang to dry while still wet and pliable. If needed, place back in the oven to re-melt and then hang.
Allow to fully dry, and then they're ready!
Use your homemade beeswax wraps to cover bowls, food containers, or directly around food. Do not use in contact with raw meat.
Wash beeswax wraps with cold to lukewarm water and mild soap. Air dry before folding and storing.
Alternative Recipe Option:
Combine 1/4 cup beeswax pastilles, 2 tablespoons of pine resin, and 1 tablespoon of organic jojoba oil in a double-boiler on the stovetop. Heat until melted and fully combined. Use a brush to apply an even coat of the mixture across the surface of the fabric. Hang immediately while still wet.
Suggested best sizes for beeswax wraps:
Small, 7×7” or 8×8” : ideal for covering small items like the top of a mason jar, half an apple or avocado, or the cut end of a cucumber
Medium, 10 or 11” square: cover an average bowl, block of cheese, half a sandwich, or other small to medium vegetables like a partial head of cabbage
Large, 13 or 14” square: cover a full sandwich, half a modest watermelon, small baking dish or average pie pan, or a medium mixing bowl – such as a bowl or basket of proofing sourdough!
Extra large, 16” or greater: create an extra large homemade beeswax wrap to cover large bowls and baking dishes, whole or partial loaves of bread, and more.