HOME > HDPE

HDPE SHEET | NATURAL HIGH DENSITY POLYETHYLENE

Durable High Density Polyethylene Sheet

 

5

stars based on

stars based on 12 Review(s)

Get Your Online Pricing: Sanitizing Acrylic and Polycarbonate »
Tips for measuring & cut-to-size policy »

How To Measure and Cut-To-Size Policy [X]

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Sanitizing Acrylic and Polycarbonate Sheet [X]

Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.

Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.

Compatible Polycarbonate Disinfectants:

• sBioMed Steriplex SD
• Safetec Surface Wipes
• Contec Healthcare Perodox RTU
• Contec Healthcare PS-911 EB Prostat Sterile Wipes

Compatible Acrylic Disinfectants:

• Pharmacy Grade Hydrogen Peroxide
• Household Bleach
• Isopropyl Alcohol (Water Diluted to 30% Strength)

[Download as a PDF]

Width
 

inches

Length
 

inches

Thickness:
 

inches

Quantity:
 

 

Total Price: $

17.47

Price per Sheet: $17.47

As low as $2/month with
Overview Specs & Uses Reviews Inquiry

HDPNE SH

- Overview

***Due to severe market volatility on HDPE and Polypropylene materials, quoted pricing for these products are valid for 4-5 days from the quoted date and surcharges have been temporarily added into the cost. Pricing and delivery of these products will be confirmed back in 24 to 48 hours. Please contact our sales team for any updates and questions you may have.***

Interstate Plastics is proud to carry High Density Polyethylene (HDPE), a machinable thermoplastic known for its high strength-to-density ratio, long term durability and light weight. HDPE's toughness and flexibility make it one of the most commonly used plastics in the United States today.

HDPE is also known by brand names including King Starboard®, King Starlite®, ColorCore®, Proteus®, PE2Print®, Corrtec®, Playboard® and Designboard®.

Durability
HDPE features high impact strength, abrasion, moisture, stain, and odor resistances, and is FDA approved to be used in the food processing industry. HDPE sheets will not splinter, rot or absorb harmful bacteria, and is extremely resistant to cleaning agents.

Machinability
HDPE's durability, versatility and high tolerances to many substances and environments make it an outstanding material for a wide variety of applications. HDPE sheets and rods have a low coefficient of friction and can be easily cut, machined, welded, and thermoformed for easy fabrication.

Storage Ability
With a low coefficient of friction, long term durability, abrasion resistance as well as high impact strength, it's no wonder HDPE is the product of choice for so many applications within marine biology, packaging, industrial, plumbing, food and beverage, consumer industries and more.

Note: HDPE is an industrial grade plastic with no protective masking. Scratches and scuffs on sheets are considered acceptable and are not a valid reason for returning this material.

Features

Interstate Plastics HDPE Product Information Sheet [PDF]

• Acid, odor, moisture, mildew and stain resistances
• Self-lubricating
• Lightweight
• Extremely easy to machine, fabricate
• Excellent chemical resistance to acids, alcohols and bases
• Excellent long term durability
• Great weather resistance
• Abrasion resistance
• Thermoforming
• High impact strength
• Good flexibility and toughness
• Cost effective
• Low maintenance
• FDA approved

Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.

• Marine Use:

boating seats, floors, cabinetry, counter tops, walkways

Storage:

bottles, bottle caps, food containers, plastic bags, bins, laundry detergent bottles, fuel tanks, watering cans, lawn and garden products, storage sheds, geomembranes for hydraulic applications (such as canals and bank reinforcements) and chemical containment.

Piping Systems:

chemical resistant piping systems, corrosion protection for steel pipelines, geothermal heat transfer piping systems, water pipes for domestic water supply, agricultural processes

Industrial:

mechanical parts, tank linings, wear strips

Consumer:

swimming pool installations, backpacking frames, banners, folding chairs and tables, hard hats, hula hoops, plastic lumber, fireworks

Outdoor Decks and Cabinetry:

outdoor, decks, cabinetry, cooking areas, fireplaces

Boarding:

arena board (puck board), moisture resistant body boards for morgues

Food and Beverage:

FDA approved cutting board, cheese molds, frozen food molds

Date Review2016-06-03Smooth transaction from a good seller, thank you. 2016-01-04Ordering was easy, shipping was fast.2015-09-17Reliable mechanical plastic with good customer service to back it2014-08-21Durable, strong. 2014-02-27lightweight and extremely strong. The chemical resistance is amazing! This can really weather any storm. :)2013-09-10I used 1/2" and 5/8" HDPE to make a set of soap molds. They've worked beautifully for several months and haven't been affected by the hot lye/oil mixture as it hardens.2013-07-07Very useful website. Kudos for customer-oriented service: size & pricing info the "other guys" don't have or are willing to provide.2013-01-21Was a bit confused on how to send over logo information but I was able to call and got help faily quickly.2013-01-14Good quality, clean well in dishwasher. Pretty durable. 2012-12-20Rigid, good impact resistance and abrasion resistance. What we were looking for. 2012-10-16I purchased this as a temporary weather barrier and it worked great. It was very sturdy and help up throughout my entire project. I am very happy with the quality of material for the cost.2012-10-16I do a lot of cooking in my home and I wanted to cover a large section of my countertop with a cutting board. A contractor recommended this material to me. I was so happy I could just put in specific measurments-everywhere else online sold in much larger quantities and I was going to have to cut it down. This was so easy to order and it looks wonderful in my kitchen. Write Your Own Review Ummm...Not BadPretty CoolGoodGreat!

29da5     

Enter the code above: HDPE SHEET | NATURAL HIGH DENSITY POLYETHYLENE Questions?

Name:Email:Phone: Inquiry Tweet